Iron on T Shirt Transfer Prints
These iron on Transfer Prints are great for both White T Shirt or Dark T Shirts. They can be used on 100 % Cotton or a Poly / Cotton Mix T-Shirt, Hoodie or Sweater.
They are easy to apply with the instructions below.
1. Slowly peel away the carrier sheet. This is the non sticky side of sheet. When you separate the layers, you will feel one side is sticky the order is not.
2. Pre-press the garment, to take out moisture and warm up the surface. Make sure the iron is set to it’s maximum heat setting with NO STEAM.
3. Position transfer image with the carrier sheet ‘plastic’ and place hot iron over entire transfer. Press with Heavy Pressure to make sure the heat goes through the transfer and activates the glue of transfer print.
4. After 45-60 seconds of press time remove the iron from the print. Slowly peel back the carrier sheet whilst the transfer is still warm. If the print lifts at all, Repeat the process if necessary with more heat and pressure.